Chamberlain 877MAX Bedienungsanleitung PDF herunterladen

Press and hold

the and #

buttons until

the lights on the

keypad stop

blinking.





Enter a 4-digit

personal

identification

number (PIN)

of your choice:





Press 0 to

complete the

programming.



The garage door

opener will activate.



? ? ? ?

796.9(4050;0(3705

*/(5.,(5,?0:;05.705

Press and release the ENTER

button...



? ? ? ?

Press the programmed PIN

that you want to change.

...the light bulb

blinks twice.



Press and hold the

# button until...



? ? ? ?

new PIN

Enter the new 4-digit PIN of your choice,

then press the ENTER button.

To test, press the PIN, then press the ENTER button.



To test, press the new PIN,

then the ENTER button.

The garage door opener

will activate.

The light bulb will blink once.

Check to see if the

light bulb blinks.

If not, slowly press

and release the

ENTER button until

the light bulb blinks.

Be careful NOT to

press the ENTER button after

the light bulb blinks.

Press and

release the

Learn button.

The LED will light.

Within 30 seconds...

79,7(9,

Locate the Learn button on the garage door

opener.

NOTE: Your garage door opener may

look different.

Learn

LED

Learn

LED

OR OR

Learn

LED

Green

Red/Orange

Purple

Yellow

To prevent possible SERIOUS INJURY or DEATH from a moving gate or garage door:

• Install Keyless Entry Control within sight of the garage door, out of reach of children at a minimum height of 5 feet (1.5 m), and

away from ALL moving parts of door.

• ALWAYS keep remote controls out of reach of children. NEVER permit children to operate, or play with remote controls.

• Activate gate or door ONLY when it can be seen clearly, is properly adjusted, and there are no obstructions to door travel.

• ALWAYS keep gate or garage door in sight until completely closed. NEVER permit anyone to cross path of moving gate or door.

* For garage door openers that have a green Learn button or an external receiver repeat "Program Initial PIN" to change the existing PIN.

To program the Keyless Entry to more than one garage door opener, repeat the steps above using a new PIN for each additional garage door opener.

WIRELESS KEYLESS ENTRY • MODEL 877MAX

Compatible with 315 MHz or 390 MHz garage door openers

manufactured after January 1, 1993. Make sure the garage door

opener has a working light bulb because it is a programming

indicator.

For use with commercial door operators or other products that are

315 MHz or 390 MHz and have a Learn button. Refer to your

product manual for the location of the Learn button.

Install the battery and program the Keyless Entry prior to

installation.

1 2 3 4

Inhaltsverzeichnis

Seite 1 - */(5.,(5,?0:;05.705

+Press and hold the and # buttons until the lights on thekeypad stopblinking.Enter a 4-digit personalidentification number (PIN)of your choice:

Seite 2 - 9V Battery

...the light bulb blinks 3 times. Press any programmed PIN, then press and hold the * button until...+? ? ? ?PIN+? ? ? ?Temporary PINEnter the

Seite 3 - 79i7(9(;065

+Pressez les boutons * et # jusqu'à ce que les DEL du clavier s'arrêtent de clignoter.Tapez un numéro d’identification personnelle (NIP) à

Seite 4

...ce que l’ampoule clignote trois fois. Appuyez sur un NIP programmé, puis appuyez sur le bouton * jusqu’à... +? ? ? ?NIP+? ? ? ?NIP temporai

Kommentare zu diesen Handbüchern

Keine Kommentare

Chamberlain 877MAX Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Sicherheit Chamberlain 877MAX herunter. Chamberlain 877MAX Manuel d'utilisation Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheit Chamberlain 877MAX